GROHE Sense Guard Smart water controller
GROHE Sense Guard - the smart water controller for enhanced water security
Welcome to GROHE Sense Guard – the innovative smart water control system that is a real life-changer. The German-made device monitors the flow, pressure and temperature of water in the pipes 24/7. One look at your smartphone tells you all you need to know! The Aquablock function shuts off the water automatically if a pipe bursts*. Even micro leaks** – which can go unnoticed for a long time and lead to lasting damage – are identified. That means total peace of mind even when you are away from home or on holiday! The smart Aqua IQ function learns your patterns of water consumption and detects anomalies*** and AquaTrack generates a comprehensive picture of your household usage. The risk of frost damage is reduced as GROHE Sense Guard also assesses water temperature and alerts you if it might freeze. The GROHE Sense app is the hub of the system. It takes seconds to download and gives you instant control, allowing you to monitor your water supply, customize your settings and also turn off the water manually. For a qualified installer, fitting GROHE Sense Guard is a simple job using the wall-mount set (22501000). Installation by one of GROHE´s Water Security Experts ensures reliable product operation. * GROHE defines a pipe burst as a complete hole or crack in the downstream piping system that results in an unintended release of water at close to maximum flow rate. Pipe burst detection depends on the general water usage profile so the time-lag to shut-off can vary significantly. During the delay water might escape. Achieve a higher detection speed by combining the installation with GROHE Sense at critical locations. ** A micro leak test is conducted once every 24 hours. Pipe material, volume and other piping system characteristics can impact the result. Micro leak detection is limited to the cold water system in most cases. Combine with GROHE Sense to monitor potential humidity increases over time. *** Detection speed depends on the water usage profile of the house. Achieve a higher detection speed by combining the installation with GROHE Sense at critical locations.
- for Wi-Fi, mains powered, 230 V
- for single-family houses
- detects pipe breaks, micro leaks, frost risk and unusual water flow
- automatic, manual or remote shut off function to limit water damage
- senses flow rate, water pressure and system temperature
- tracks water consumption
- receive notifications and customize settings via GROHE Sense App
- status indication via LED light, buzzer and push notifications
- Wi-Fi 2.4 GHz, WPA/WPA2 protected
- for horizontal or vertical installation right downstream the water meter
- use of wall mounting set 22 501 000 with G1" connection recommended, sold separately
- including R3/4" mounting nuts, extendable power cable 0.7 m, plug type C
- noise classification I in accordance with DIN 4109
- to be installed on cold water pipes only
- CE approved
- Made in Germany
CAD Data
Pos.-nr. | Prod. description | Order-nr. |
---|---|---|
* Optional accessories | ||
1 | Mains adaptor | 48373LN0 |
2 | Seal kit | 48358000 |
3 | Wall mounting set | 22501000* |
4 | Power extension cable | 22521LN0* |